Transformerless 5 Volt Power Supply
The trend of modern appliances utilizing minimal power consumption necessitates careful consideration in the design of mains-powered devices. These devices often require efficient power management to ensure they operate effectively while adhering to energy-saving regulations.
In designing such a device, it is essential to incorporate an appropriate power supply circuit capable of handling low current levels. A switch-mode power supply (SMPS) can be advantageous due to its high efficiency and compact size. The circuit should include a transformer to step down the mains voltage, followed by a rectification stage using diodes to convert AC to DC.
Additionally, a filtering stage is crucial to smooth the output voltage, typically achieved with capacitors. For devices that require very low standby power, integrating a low-power microcontroller can facilitate monitoring and control functions while maintaining minimal energy consumption.
Protection mechanisms, such as fuses or circuit breakers, should be included to safeguard against overcurrent conditions. Furthermore, the design should comply with relevant safety standards to ensure user safety and device reliability.
Overall, the design of mains-powered devices that draw minimal current must focus on efficiency, safety, and compliance with energy regulations, ensuring that the final product meets both performance and environmental standards.An increasing number of appliances draw a very small current from the power supply. If you need to design a mains powered device, you could generally choo.. 🔗 External reference
Related Circuits
Villard cascade voltage multiplier. A voltage multiplier is an electrical circuit that converts AC electrical power from a lower voltage to a higher DC voltage, typically by means of a network of capacitors and diodes. Voltage multipliers can be...
As depicted in the image, when the output current surpasses 40mA, the internal resistance of 50Ω in the XTR110 (R9) must be substituted with an external resistance, REXT. This external resistance is connected between pins 13 and 16. The...
Interfacing high power loads can be accomplished in various ways, including the use of voltage divider resistors, transformers, or optocouplers. The circuit illustrated below employs the optocoupler method. This optocoupler facilitates logic level translation with flexible input, accommodating a...
The circuit consists of two LM339 comparators and two CD4070 XOR gate thyristors, along with additional components such as an autotransformer exchange regulator. It also features overvoltage and undervoltage protection. The control range can be adjusted by modifying the...
The Triac V trigger voltage is less than 1V, and the trigger current is less than 30mA. The Triac is a semiconductor device commonly used for controlling AC power. It operates by allowing current to flow in both directions when...
All naturally occurring phenomena such as sound, temperature, and pressure are analog in nature. To enable a microcontroller to read analog signals for the analog-to-digital conversion process using a built-in analog-to-digital converter (ADC), it is essential to condition the...