Digital voltmeter using ICL7107


Posted on Feb 7, 2014

The circuit given here is of a very useful and accurate digital voltmeter with LED display using the ICL7107 from Intersil. The ICL7107 is a high performance, low power, 3. 5 digit analog to digital converter. The IC includes internal circuitry for seven segment decoders, display drivers, reference voltage source and a clock. The power dissipation


Digital voltmeter using ICL7107
Click here to download the full size of the above Circuit.

is less than 10mW and the display stability is very high. The working of this electronic circuit is very simple. The voltage to be measured is converted into a digital equivalent by the ADC inside the IC and then this digital equivalent is decoded to the seven segment format and then displayed. The ADC used in ICL7107 is dual slope type ADC. The process taking place inside our ADC can be stated as follows. For a fixed period of time the voltage to be measured is integrated to obtain a ramp at the output of the integrator. Then a known reference voltage of opposite polarity is applied to the input of the integrator and allowed to ramp until the output of integrator becomes zero. The time taken for the negative slope to reach zero is measured in terms of the IC`s clock cycle and it will be proportional to the voltage under measurement. In simple words, the input voltage is compared to an internal reference voltage and the result is converted in a digital format. The resistor R2 and C1 are used to set the frequency of IC`s internal clock. Capacitor C2 neutralizes the fluctuations in the internal reference voltage and increases the stability of the display. R4 controls the range of the voltmeter. Right most three displays are connected so that they can display all digits. The left most display is so connected that it can display only 1  and -. The pin5(representing the dot) is connected to ground only for the third display and...




Leave Comment

characters left:

New Circuits

.

 


Popular Circuits

Car wireless alarm
High isolation telephone ringer
F232 is USB powered
Bus / Register Tutorial
momentary button as onoff toggle using 555
Lm3485 Led Demo Board
BJT H-bridge Circuit Details
High Fidelity Valve audio Amplifier 40W



Top