USB Powered Audio Power Amplifier


Posted on Feb 5, 2014

This circuit of multimedia speakers for PCs has single-chip-based design, low-voltage power supply, compatibility with USB power, easy heat-sinking, low cost, high flexibility and wide temperature tolerance. At the heart of the circuit is IC TDA2822M. This IC is, in fact, mono-lithic type in 8-lead mini DIP package. It is intended for use as a dua


USB Powered Audio Power Amplifier
Click here to download the full size of the above Circuit.

l audio power amplifier in battery-powered sound players. Specifications of TDA2822M are low quiescent current, low crossover distortion, supply voltage down to 1. 8 volts and minimum output power of around 450 mW/channel with 4-ohm loudspeaker at 5V DC supply input. An ideal power amplifier can be simply defined as a circuit that can deliver audio power into external loads without generating significant signal distortion and without consuming excessive quiescent current. This circuit is powered by 5V DC supply available from the USB port of the PC. When power switch S1 is flipped to on` position, 5V power supply is extended to the circuit and power-indicator red LED1 lights up instantly. Resistor R1 is a current surge limiter and capacitors C1 and C4 act as buffers. Working of the circuit is simple. Audio signals from the PC audio socket/headphone socket are fed to the amplifier circuit through components R2 and C2 (left channel), and R3 and C3 (right channel). Potmeter VR1 works as the volume controller for left (L) channel and potmeter VR2 works for right (R) channel. Pin 7 of TDA2822M receives the left-channel sound signals and pin 6 receives the right-channel signals through VR1 and VR2, respectively. Ampl i f ied signals for driving the left and right loudspeakers are available at pins 1 and 3 of IC1, respectively. Components R5 and C8, and R6 and C10 form the traditional zobel network. Assemble the circuit on a...




Leave Comment

characters left:

Related Circuits

  • New Circuits

    .

     


    Popular Circuits

    Infrared Alarm
    Capacitance meter with 555
    Pulse generation by interrupting a light beam
    Radar Calibrator Circuit
    Beam-break Detector For Camera Shutter or Flash Control
    Adopt the two-dimentional bar-code scanner of DSP56F826 chip to introduce systematically
    accelerometer Can internal PLL affect control logic in MEMS sensor
    Three Hour Timer
    The counter
    Motorola Micor S-meter Driver
    Multifunctional motor protection circuit
    The same capacitance parameters easy to change the cutoff frequency of the low pass filter 24dB-oct
    INA321 322 a direct drive capacitive input of the A D converter Figure
    7W Audio Power Amplifier LF356



    Top