Repository-circuits
- Page 601
-
The diagrams below detail the development of a simple modular radio receiver based entirely on circuits and devices studied during the Part IA course on Linear Circuits and Devices. This receiver may not take the market by storm! However, we hope it will....
-
-
The circuit that allows you to expand from one 15 pin d-sub VGA output to multiple others. I built upon the schematic found online here and expanded it to allow up to 6 monitors connected at once! The input VGA connector is on the left while the 6 output VGA....
-
-
-
Crystal with small CL(7. 0 pF) makes larger oscillation allowance, smaller current consumption and worse frequency stability, like below table. As the actual board layout and choice of external components influences the best suitable crystal load....
-
The above shows my home-built digital clock. It uses Nixie-tubes for readout. In contrast to most other nixie-clocks being built these days, my clock does not use any transistor or IC for driving the tubes. Instead, the driving logic is built from neon....
-
-
Connecting a condenser capsule to the grid of a tube amplifier, in order to build a tube mic. In this part we consider how to connect a capsule with two diaphragms in order to get a multi-pattern mic. First let`s examine the different pickup patterns....
-
Even in the simplest of tube microphone circuits, there are different approaches to connecting the microphone capsule to the tube. Let`s use a single-sided microphone capsule as our starting point. The capsule behaves as a variable capacitor, changing its....
-
The power supply was built into the base of the mic which can lead to hum issues despite the on-board potentiometer that acts as a `null`. This also means that the mic has two cables running from it - one for power and one for audio. Both mics use two-stage....
-
This will walk through adding hardware to a Linksys WRT54GL wireless router that will take advantage of existing connections on the PCB for two UART connections, which will be exposed as DB9 serial port connectors mounted to the faceplate of the router.....
-
XinuPhone promotes hands-on interactive learning that is both cross-discipline and application oriented. As a research tool, XinuPhone is a versatile and open-source platform useful for benchmarking experimental methods against industry standards.....
-
-
A real cheap glove interface, that still achieves considerable accuracy while improving the comfortability. Essentially, I purchased a bunch of PowerGloves (PG`s), took out the flex sensors, inserted them in sheaths on a lycra glove and suit, hooked them up....
-
The adjustment control for the contrast of an LC-Display is typically a 10-k potentiometer. This works fine, provided that the power supply voltage is constant. If this is not the case (for example, with a battery power supply) then the potentiometer has to....
-
This circuit is much more modest, but certainly still worth the effort. It provides a high quality interior light delay. This is a feature that is included as standard with most modern cars, although the version with an automatic dimmer is generally only....
-
In some cases, it is desirable to extend the range of the available control and this circuit fits the bill, receiving the IR signal from your remote control and re-transmitting it, for example, around a corner into another room. Photodiode D4 is connected to....
-
-
When turning a computer on and off, various peripherals (such as printers, screen, scanner, etc. ) often have to be turned on and off as well. By using the 5-V supply voltage from the USB interface on the PC, all these peripherals can easily be switched on....
-
Before we describe how it`s done, note that we recommend that the result be checked as having sufficient brightness for a stop & tail-light application. That`s because the light output may be inadequate, depending on the tail-light lens and reflector....
-
-
-
-
This simple device allows two computers to share a single USB printer or some other USB device, such as an external flash drive, memory card reader or scanner. A rotary switch selects the PC that you wish to use with the USB device, while two LEDs indicate....
-
The debate still goes on as to which are better, valves or transistors. We don`t intend to get involved in that argument here. But if you can`t make your mind up, you should try out this simple amplifier. This amplifier uses a valve as a pre-amplifier and a....
-
This white-LED driver circuit is ideal for use in a garden light. It automatically turns the LED on at night and runs from a single 1. 2V nicad cell which is recharged by a solar cell during the day. The prototype used the existing casing and solar cell from....
-
-
-
-
When the push button is pressed, a clock pulse appears on the CLK input of flip-flop IC1b. The output then toggles and the LEDs turn off. At the same time IC1a is reset, which silences the buzzer. If you press the button again, the LEDs will turn on since....
-
This little aid was originally designed to test the Shutter Time Meter. This meter was specifically designed for analogue` SLR cameras. In order to measure the exposure time of a camera accurately, it will first have to be checked with a well-defined signal....
-
Using any camera in a dull or dark environment generally requires the use of supplementary light. This is a standard technique, and even where adequate natural lighting exists, to take conventional film pictures with enhanced contrast using a fill-in` flash....
-
The flash that is built into digital cameras is designed for indoor photography. At subject distances of greater than five meters or so, the light is usually not powerful enough to take a satisfactory picture. Unfortunately most such cameras do not include a....
-
Fluorescent tubes use far less energy than incandescent lamps and fluorescent tubes last a great deal longer as well. Other advantages are diffuse, glare-free lighting and low heat output. For these reasons, fluorescent lighting is the natural choice in....