elp needed making changes circuit

Hello everyone, I am not well-versed in electronics, so I would appreciate it if someone could create a diagram for me. I would like to modify a circuit so that it can dial a number using speed dial and also activate a siren when triggered. Additionally, I want to incorporate vibration sensors as triggers for the siren. Essentially, it is a simple laser siren that activates when the laser beam does not reach the photodetector. The circuit breaks, and the siren sounds for the duration of the laser interruption. However, I want to modify it so that if the laser is interrupted for just a second, the siren continues to sound until it is stopped by a switch or manually. Here is the circuit diagram I have.

To create a circuit that meets the specified requirements, several components and modifications must be considered. The primary function of the circuit is to detect interruptions in a laser beam and activate a siren while also incorporating speed dialing capabilities and vibration sensors as triggers.

1. **Laser Beam Detection**: The circuit will utilize a laser diode and a photodetector (such as a phototransistor or photodiode). When the laser beam is uninterrupted, the photodetector will receive continuous light, keeping the circuit closed. When the beam is interrupted, the photodetector will signal a change in state, which can be detected by a microcontroller or a logic circuit.

2. **Siren Activation**: Upon detecting an interruption, the circuit should activate a siren. This can be achieved using a relay or a transistor to drive the siren. The siren will sound for the duration of the interruption. To modify the circuit such that the siren continues to sound for a preset duration even after a brief interruption, a timer circuit (such as a 555 timer configured in monostable mode) can be incorporated. This timer will keep the siren activated for a specified time after the interruption is detected.

3. **Speed Dialing Feature**: For the speed dialing functionality, a GSM module (such as the SIM800 or SIM900) can be integrated into the circuit. The microcontroller can be programmed to send a command to the GSM module to dial a predetermined number when the siren is activated. The microcontroller will control the GSM module through serial communication.

4. **Vibration Sensors**: To enhance the triggering mechanism, vibration sensors can be added. These sensors can be connected to the microcontroller as additional inputs. When vibration is detected, the microcontroller can trigger the siren and initiate the speed dial function similarly to the laser interruption.

5. **Manual Override**: To allow for manual stopping of the siren, a switch can be included in the circuit. This switch can be connected to the microcontroller to provide a way to deactivate the siren when necessary.

Overall, the final schematic will include the laser diode, photodetector, microcontroller, GSM module, siren, relay or transistor, vibration sensors, timer circuit, and a manual switch. The interconnections should be carefully designed to ensure proper functionality, with attention to power requirements and signal integrity. The microcontroller will require programming to handle the logic for detecting interruptions, managing the siren duration, and controlling the GSM module for dialing.hi every one im not in the line to electronics so please can any one make a diagram for me that how i change this circuit so that it will dial a number using speed dial and also beeps a siren when triggerd and i also add some vibration sensors as siren triggers in it. bassicallly it is a simple laser siren when laser are not comming to photo cell i t breaks circuit and siren beeps for the time period of interuption of laser but when laser again goes to photo cell siren stops i also want to change that in a way that if laser interupts for just a second siren will runs until not stop by a switch or manually. here is the circuit diagram i have 🔗 External reference