IR remote control relays
The 4 Channel Infrared (IR) Remote system utilizes the HT12A and HT12D integrated circuits to facilitate wireless communication between a transmitter and a receiver. The HT12A serves as the encoder, which is responsible for converting the input signals from the remote control into a serial data stream suitable for transmission. The HT12D acts as the decoder, receiving the transmitted data and converting it back into parallel output signals that can control various devices.
The system typically comprises a transmitter unit, which includes the HT12A chip, a 16-pin DIP switch for address selection, and an IR LED for broadcasting the encoded signals. The HT12A can encode up to 12 bits of data, allowing for control of multiple channels. Each channel can be activated by pressing corresponding buttons on the remote, which sends a unique signal pattern.
On the receiver side, the HT12D chip is connected to an IR photodiode or phototransistor that detects the incoming infrared signals. Once the HT12D receives the encoded signal, it decodes it and provides a corresponding output on its pins. The outputs can be connected to various devices such as motors, lights, or other electronic components, allowing for remote control applications.
The operation of the system can be further enhanced by incorporating additional features, such as feedback mechanisms or multiple receivers for broader coverage. The simplicity of the design, combined with the reliability of the HT12A and HT12D chips, makes this 4 Channel IR Remote system an excellent choice for hobbyists and professionals looking to implement wireless control solutions in their projects.4 Channel Infrared (IR) Remote is a simple kit using the famous HT12A and HT12D encoder / decoder chips from Holtek. 🔗 External reference
Related Circuits
This Low Dropout Voltage (LDO) solar charge controller utilizes a straightforward differential amplifier combined with a series P-channel MOSFET linear regulator, creating an effective synergy. The voltage output is adjustable and is primarily designed for charging 12V lead-acid batteries....
R1 is a 15k ohm resistor. An NTC thermistor rated at 10k ohm, available at Radio Shack in the United States, is utilized. P1 is a 10k ohm potentiometer that sets the low speed (voltage) of the fans at...
This method of automatic level control (ALC) utilizes digitally switched audio attenuators within the signal path. The output level of the system is monitored, compared to a reference level, and audio pads are introduced through analog switches. This technique...
Due to the huge interest in this project, I have just recently finished the NEW schematics. The older schematics were scanned and pretty poor quality. These new ones should make it considerably easier to recognize the parts used for...
Involvement is a modified version of the classic circuit of automatic level control signal used in tape recorders. The purchase price of the components (using TL072) does not exceed CZK 60 for a channel. For a range of entry...
We have developed a powerful yet inexpensive and easy to construct experiment control system. The construction of the system together with the control software is described here. All circuits and software are free to download and use for nonprofit....