Simple 10W audio amplifier

The circuit presented is a simple audio amplifier capable of delivering 12W to an 8 Ohm speaker. The operational amplifier IC TL081 serves as the preamplifier in this design. Alternatively, any operational amplifier with compatible power supply ratings can be utilized in place of the TL081. The power amplifier stage is composed of transistors Q1 and Q2, specifically the TIP125 and TIP120 models. The output is derived from the collector junction of the two transistors.

The audio amplifier circuit is designed to enhance audio signals for driving speakers, particularly in applications where moderate power amplification is required. The operational amplifier TL081 is configured in a non-inverting configuration, providing high input impedance and low output impedance, which is ideal for audio signal processing. The gain of the preamplifier stage can be adjusted by varying the feedback resistors, allowing for flexibility in signal amplification based on the input source.

In the power amplification stage, the TIP125 and TIP120 transistors are configured in a complementary push-pull arrangement. This configuration allows for efficient amplification of the audio signal, ensuring that both the positive and negative halves of the waveform are amplified effectively. The use of these specific transistors enables the circuit to handle higher current loads, making it suitable for driving an 8 Ohm speaker with a power output of 12W.

The output stage is designed to provide a robust output signal with minimal distortion. The collector junction of the transistors serves as the output point, where the amplified audio signal is delivered to the speaker. Additional components such as capacitors may be included in the circuit to filter out high-frequency noise and ensure a clean audio output. Proper heat sinking for the transistors is also recommended to prevent thermal overload during operation.

Overall, this audio amplifier circuit is an effective solution for applications requiring reliable audio amplification with moderate power output, suitable for various audio devices and projects.The circuit given below is of a simple audio amplifier that can deliver 12W to an 8 Ohm speaker. Op amp IC TL081 is used as the preamplifier here. Actually any opamp with matching power supply ratings can be used instead of TL081. Transistors Q1 and Q2 (TIP125 and TIP120) comprises the power amplifier stage. Output is taken from the collector junct ion of two transistors. 🔗 External reference