X100 operational amplifier
No description available.
Related Circuits
The circuit provides low-frequency boost below 318 Hz and high-frequency attenuation above 3150 Hz. Recent modifications to the response standard include a 31.5-Hz peak gain region to reduce de-oriented distortion from external vibration. The described circuit functions as an audio...
The LME49830 EF125WT1 amplifier PCB module features National Semiconductor's LME ultra-high fidelity power amplifier input stage integrated circuits (drivers). The LME49830 is a fully complementary bipolar 200V input stage IC with a typical output current of 56mA, specifically optimized...
The circuit generates a positive output voltage for either polarity of input. For positive signals, it functions as a non-inverting amplifier, while for negative signals, it operates as an inverting amplifier. The accuracy is poor for input voltages under...
This is a symmetrical amplification unit circuit, modified based on a design proposed by Lisley Hood several years ago. The primary objective is to select the appropriate FET transistor for the differential amplifier at the input stage. Despite this...
Oatley Electronics, located in New South Wales, Australia, offers several kits based on the Raytheon JAN 6418 sub-miniature valve (tube). The K272A Stereo Tube Preamplifier - Headphone Driver kit, priced at $27 AU, is one such kit. (Note: The...
This design addresses the limitations of the microphone preamp in the Sony R91, which clips at low levels, providing only 28mV of headroom for an input that may reach 1800mV, depending on the microphone and volume settings. The design...