Can I supply a 12V buzzer with 18V

Create a small buzzer for a bicycle that emits sound intermittently to deter bears. A 12V buzzer from Radio Shack (Cat. No. 273-065) is available, and there is a question regarding the feasibility of operating it directly from an 18V supply (two 9V transistor batteries in series) for short bursts of 1-2 seconds. There is also a consideration of whether to use an LM317 voltage regulator, with concerns about its energy consumption compared to the protection it offers. Additionally, there is an inquiry about the durability of piezo elements when used in this manner.

To implement a buzzer system for a bicycle that activates intermittently to alert bears, the chosen component is a 12V piezo buzzer (Radio Shack Cat. No. 273-065). Operating the buzzer directly from an 18V supply, derived from two 9V batteries in series, is feasible for brief periods. However, it is essential to consider that exceeding the rated voltage of the buzzer may lead to overheating or damage over time. The buzzer can handle short bursts of 1-2 seconds at this voltage, but this usage should be limited to avoid potential failure.

An alternative approach is to utilize an LM317 voltage regulator to maintain the voltage at a safe 12V level. The LM317 is a linear voltage regulator that can provide a stable output voltage while also protecting the buzzer from overvoltage. However, it is important to note that linear regulators dissipate excess voltage as heat, which may lead to increased energy consumption compared to a direct connection. This aspect should be evaluated against the need for voltage regulation and protection.

In terms of durability, piezo elements are generally robust and can withstand a range of operating conditions. When used in this application, they should perform reliably if the voltage is kept within acceptable limits. The choice between direct operation at a higher voltage or regulated operation should be based on the specific requirements for power efficiency, component longevity, and the overall design of the circuit.

In summary, the circuit design should carefully weigh the benefits of using an LM317 for voltage regulation against the risk of potential damage from overvoltage when directly powering the buzzer from an 18V supply. Proper consideration of component ratings and operating conditions will ensure the effectiveness and reliability of the buzzer system for bear deterrence on the bicycle.Make a little buzzer for my bike to sound occasionally to warn off bears. I have a 12V buzzer from Radio Shack (Cat. No. 273-065) and was wondering if I could run it off of 18V directly (2x9V Transistor Batteries series) for 1-2 second bursts, or if I should run through a lm317 which I worry might use more energy than the protection it provides. Are piezo elements relatively rugged when used like this 🔗 External reference