TBA820M high gain audio amplifier circuit design electronic project
The TBA820M audio amplifier is ideal for low-power audio applications due to its compact design and efficient performance. The device operates in Class B mode, which provides improved efficiency compared to Class A amplifiers, particularly in battery-operated devices. The amplifier can deliver a significant output power while maintaining low distortion levels, making it suitable for high-fidelity audio applications.
To construct a basic audio amplifier circuit with the TBA820M, the following components are typically required: the TBA820M IC, a power supply (within the specified voltage range), resistors for biasing and feedback, capacitors for coupling and decoupling, and a speaker or load for output. The circuit configuration usually involves connecting the input audio signal to the non-inverting terminal of the amplifier while the inverting terminal is connected to a feedback resistor network that sets the gain of the amplifier.
The gain of the TBA820M can be adjusted by selecting appropriate resistor values in the feedback loop. Additionally, coupling capacitors are employed to block any DC component of the audio signal, allowing only the AC signal to pass through to the amplifier. Decoupling capacitors are also used to stabilize the power supply and reduce noise, ensuring that the amplifier operates efficiently.
In summary, the TBA820M integrated circuit provides a versatile solution for designing simple yet effective audio amplifiers suitable for various applications, especially where space and power efficiency are critical. Its ability to amplify low-frequency signals makes it particularly advantageous for portable and battery-powered audio devices.Using TBA820M audio amplifier integrated circuit can be designed a very simple audio amplifier circuit using few electronic parts. This audio amplifier electronic project has a very high gain as can be hear under water sounds. The TBA820M is a monolithic integrated audio amplifier in a 8 lead dual in-line plastic package. It is intended for use a s low frequency class B power amplifier with wide range of supply voltage: 3 to 16V, in portable radios, cassette recorders and players etc. 🔗 External reference
Related Circuits
The LM3914A bar graph LED is utilized as a voltmeter for testing batteries. This circuit operates on a 4.5-V battery and compares the battery under test with an internally generated reference, established by resistors R1, R2, and potentiometer P1....
The stereo tone control circuit utilizes the integrated circuit TDA1524A. This IC serves as the central component in the design. The TDA1524A is a versatile integrated circuit designed for audio applications, particularly in tone control systems. It features a dual-channel...
Figure 16-40 illustrates a three-phase rectifier circuit featuring a current cutoff feedback mechanism. In part (a) of the figure, three current transformers are utilized, while part (b) shows the configuration using two current transformers connected in an open delta...
This high-power audio amplifier provides top-quality performance for loudspeakers with an impedance of 4 to 8 ohms. It operates within a frequency range of 20 to 20,000 Hz and requires a voltage supply of 24 to 36 volts, with...
The schematic below illustrates four methods of controlling a relay with a digital logic signal. Figure A can be used in most cases where the relay coil requires 100 mA or less and the input current is 2 milliamps...
This is a design for a temperature-to-digital converter circuit that is controlled by the LM35 integrated circuit. The LM35 is a precision integrated circuit temperature sensor, whose output voltage is linearly proportional to the Celsius temperature. The circuit utilizes the...