Basic LM386 audio amplifier schematic
The Tiny Audio Amplifier kit utilizes the LM386 integrated circuit, which is designed for low voltage audio applications. The amplifier operates within a power supply range of 6 to 12 VDC, making it suitable for battery-powered devices. It delivers an output power of 1 watt into an 8-ohm load, which is adequate for driving small speakers or headphones.
The quiescent power drain of the amplifier is low, at only 24 mW when powered by a 6 VDC supply. This characteristic is advantageous for battery-operated applications, extending the operational life of the device. The output stage of the LM386 is designed to maintain a self-centering quiescent voltage, ensuring stable performance and minimal distortion in the audio output.
Volume adjustment is facilitated by an onboard PRESET potentiometer, allowing users to fine-tune the audio level according to their preferences. The circuit features terminal pins for easy connections to the power supply, audio input signal, and output speaker, promoting straightforward integration into various projects.
A power-on LED indicator is included to provide visual feedback when the amplifier is active, enhancing usability. The power supply is controlled by an ON/OFF PCB-mounted slide switch, enabling convenient operation.
The printed circuit board (PCB) measures 44 mm by 44 mm and includes four mounting holes, each with a diameter of 3.2 mm, allowing for secure installation in enclosures or projects. This compact design makes the Tiny Audio Amplifier kit an excellent choice for hobbyists and engineers seeking a simple yet effective audio amplification solution.The Tiny Audio Amplifier kit is a good choice for battery operation. It is based on LM386 IC. Power supply - 6 - 12 VDC. Output power - 1 W, 8 Ohm. The quiescent power drain is only 24 mW when operating from 6 VDC. Self-centering output quiescent voltage. Onboard PRESET to adjust volume. Terminal pins for connecting power supply, audio signal and speaker. Power-On LED indicator. ON/OFF PCB mounted slide switch for power supply. Four mounting holes of 3.2 mm each. PCB dimensions 44 mm x 44 mm. 🔗 External reference
Related Circuits
The SA9618A is designed for ALPC and signal conversion between a CD optical pickup and a decoding chip. This integrated circuit (IC) features an interconnection for a general CD optical pickup photodiode bias voltage VREF generation circuit, an RF...
This wideband RF isolation amplifier has a frequency response of 0.5 to 400 MHz ± 0.5 dB. This two-stage amplifier can be utilized in applications that require high reverse isolation, such as receiver intermediate-frequency (IF) strips and frequency distribution...
The complete hardware schematic of the Night Light Saver V6.0 includes an AC line protected by a 1A fuse (F1). Any short circuit caused by the components of the saver will blow the fuse. Resistor R1 and capacitor C1...
The active filter is a state variable filter with bandpass, high-pass, and low-pass outputs. It is a classical analog computer method of implementing a filter using three amplifiers and only two capacitors. The state variable filter is a versatile circuit...
The circuit topology is similar to the previously mentioned amplifier, utilizing the robust IRFP240 and IRFP9240 MOSFET devices as the output pair, along with high-voltage Motorola transistors in the preceding stages. The supply rail voltage is conservatively set at...
The car power amplifier utilizes the SI1050GL integrated circuit (IC) as the primary amplification component. It delivers an output power of 50 Watts at an 8-ohm mono impedance. The amplifier operates with a DC voltage of up to 25...