- Home /
- Search about UHF TRANSCEIVER
Page 9 about UHF TRANSCEIVER | |
Total Found: 315 |
-
This project implements a half-duplex, master/slave communications protocol based on RS-485 bus hardware. A Windows PC plays the role of bus-master and several Atmel 8-bit AVRs assume the role of bus-slaves. The Windows part is written in C+, the ninth data....
-
A very simple low cost and ultra compact VHF UHF Low-Noise amplifiers circuit can be designed using the MAX2664 and MAX2665 ultra-compact LNAs for VHF/UHF applications. These devices incorporate a broadband LNA with an integrated bypass switch. The MAX2664....
-
ZSSC1856 of ZMDI Company is the double-channel ADC of integrating embedded MCU, made up of two chips, PQFN32 5x5mm capsulates. Basic chip SBC of the system Having included the high tension circuit, LIN transceiver and including the peripheral hardware, 18....
-
The MAR6 (MSA-0686, 0685, 0885) is a high performance silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) housed in a low cost, surface mount plastic package. This MMIC is designed for use as a general purpose 50 W gain block. Applications include....
-
Recent innovations in process and circuit design have enabled the release of three new RS485 transceivers: the LTC®1481, LTC1483 and LTC1487. These devices share an improved receiver circuit which features 80mA quiescent current operation (driver....
-
This circuitry offers some features that are highly desirable when building a QRP (or ANY) transceiver. It also includes a combination of features that many might not always take the time to include in their projects. Considerable effort has been made to....
-
The machine model, commonly used for ESD testing in Japan, is a more severe ESD test. This model simulates metallic contact between the device under test and a charged body. The source capacitor is 200pF with no limiting resistor. The higher source....
-
The LT®1180 RS232 transceiver includes a charge pump which produces low ripple supplies with suffi - cient surplus current to drive a CMOS A to D converter and precision voltage reference. The circuit in Figure 1 operates from a single 5V supply, and draws a....
-
This amplifier has about 20dB of gain, bandwidth of 100MHz and noise figure of about 7dB. The output transformer is 8 turns bifilar wound on a ferrite core. Use a medium power UHF transistor 2N5109, 2N3866, 2N4427 or similar. The transistor will need a small....
-
The LT®1785 and LT1791 RS485/RS422 transceivers with ±60V fault tolerance solve a real-world problem of field failures in typical RS485 interface circuits. Modems and other computer peripherals use point-to-point RS422 connections to support higher....
-
Sending Morse on a rig without a sidetone is not impossible, but is not particularly pleasant either. This battery-powered monitor has been designed to provide an audible indication of keying for those whose rigs lack a CW sidetone. Its sensor wire is....
-
The LTC1685 is geared for half-duplex operation, whereas the LTC1686/LTC1687 can operate in full-duplex mode. All include a receiver fail-safe feature, whereby the receiver output remains in a high state over the entire 12V to 7V common mode range when....
-
The RS485 interface standard is designed to handle a 7V to 12V input signal range; however, in practical systems, ground potentials vary widely from node to node, often exceeding the specified range. This can result in an interruption of communications,....
-
The board has been initially developed to learn with CAN, so a CAN transceiver is available (IC4). The CAN transceiver comes from Maxim, but some other manufacturers provide some compatible CAN transceivers which can be used. An RS232 transceiver is also....
-
The XSV-300 board is a versatile FPGA development board providing a 300-Kgate FPGA, programmable clock oscillators, standard PC interface components (e.g. a USB-Transceiver), Flash memory, RAM and 7-segment displays...
-
Here is a nice little receiver for narrow-band FM reception. It can also be used to receive FSK, RTTY and PACKET signals from the HF bands. Basic receiver sensitivity is in the region of 1uV PD and the receiver can be tuned to almost any frequency from....
-
The circuit uses easily available components. Most of the coils are wound on low cost balun core. The circuit uses ladder filter. Filter is build around four numbers of 4.43 MHz crystals. I used ladder filter because it is cheap and getting reasonably good....
-
Most of us don`t have the luxury of building a 1/4, 1/2 or even a 5/8 wavelength vertical antenna for HF. We have to settle for something a little shorter. (A lot shorter, in the case of people following the FCC`s Part 15 rules, which limit them to 3 meters....
-
A 'TV modulator' is really no more than a transmitter. It is a very small transmitter, admittedly, but none the less that is what it is. What does a modulator actually do? In general -and this design is no exception to the rule - it is a simple oscillator....
-
-
Application Note 381 contains information necessary to interface the Motorola MPC8260 processor to the DS2155 T1/E1/J1 Single Chip Transceiver (SCT). The application note covers interfacing both the address and data processor bus and the communications....
-
Antenna is the means by which a wireless operator puts his signal into the space and also through which he picks up the signals of the stations with which he wants to communicate. Hence after having a good Receiver and a Transmitter (or Transceiver), the....
-
1. Full 5 watt output using a power MOSFET final that is resistant to high SWR and thermal runaway. This final is very efficient and runs much cooler than traditional bipolar designs. 2. Highly sensitive and selective superhetrodyne....
-
The MPF102 (Q1) can be replaced with a NTE451 or ECG451, but still widely available. JFET-N-CHAN, UHF/VHF AMP. The 2N3565 (Q1/Q2) can be replace with a 2N2222(A), BC107, BC108, BC109(A/B/C), NTE123A, or ECG123A. The TIP31 (Q3) can be replaced with a NTE196....
-
This project arises from the need to home-build a valid tuning control for a multi band transceiver. It consists of a partial syntesis V.F.O. that fits to single conversion equipments with an I.F. stage nearby 9 MHz. The circuit can cover the whole H.F.....
-
Hand held computers are rapidly moving to 3V logic to save power. Yet higher voltage buses are still utilized elsewhere in the system for display driving and other functions. The LT1330 is functionally equivalent to the LT1237 but operates from 5V with a....
-
Many RS-485 and RS-422 networks require isolation for safety, noise reduction, or ground loop elimination. A conventional circuit is shown in Figure 1. Unfortunately, optocoupler isolation is slow, complicated, and unreliable. Although RTS does not require....
-
The remote control receiver is a custom design based on a pre-built 433MHz UHF radio receiver, a decoder chip and a BASIC Stamp. The Stamp is expensive, but easy to work with. The receiver requires 8.5mA, plus 1.5mA for each LED (individual or segment) that....
-